wopr:/usr/src/linux:# make config rm -f include/asm ( cd include ; ln -sf asm-i386 asm) /bin/sh scripts/Configure arch/i386/config.in # # Using defaults found in .config # * * Code maturity level options * Prompt for development and/or incomplete code/drivers (CONFIG_EXPERIMENTAL) [Y/n/?] * * Loadable module support * Enable loadable module support (CONFIG_MODULES) [Y/n/?] Set version information on all symbols for modules (CONFIG_MODVERSIONS) [Y/n/?] Kernel daemon support (e.g. autoload of modules) (CONFIG_KERNELD) [Y/n/?] * * General setup * Kernel math emulation (CONFIG_MATH_EMULATION) [N/y/?] Networking support (CONFIG_NET) [Y/n/?] Limit memory to low 16MB (CONFIG_MAX_16M) [N/y/?] PCI bios support (CONFIG_PCI) [Y/n/?] PCI bridge optimization (experimental) (CONFIG_PCI_OPTIMIZE) [Y/n/?] System V IPC (CONFIG_SYSVIPC) [Y/n/?] Kernel support for a.out binaries (CONFIG_BINFMT_AOUT) [N/y/m/?] Kernel support for ELF binaries (CONFIG_BINFMT_ELF) [Y/m/n/?] Kernel support for JAVA binaries (CONFIG_BINFMT_JAVA) [N/y/m/?] Compile kernel as ELF - if your GCC is ELF-GCC (CONFIG_KERNEL_ELF) [Y/n/?] Processor type (386, 486, Pentium, PPro) [Pentium] defined CONFIG_M586 * * Floppy, IDE, and other block devices * Normal floppy disk support (CONFIG_BLK_DEV_FD) [y/M/n/?] Enhanced IDE/MFM/RLL disk/cdrom/tape/floppy support (CONFIG_BLK_DEV_IDE) [Y/n/?] * * Please see Documentation/ide.txt for help/info on IDE drives * Use old disk-only driver on primary interface (CONFIG_BLK_DEV_HD_IDE) [N/y/?] Include IDE/ATAPI CDROM support (CONFIG_BLK_DEV_IDECD) [Y/n/?] Include IDE/ATAPI TAPE support (CONFIG_BLK_DEV_IDETAPE) [N/y/?] Include IDE/ATAPI FLOPPY support (new) (CONFIG_BLK_DEV_IDEFLOPPY) [N/y/?] SCSI emulation support (CONFIG_BLK_DEV_IDESCSI) [N/y/?] Support removable IDE interfaces (PCMCIA) (CONFIG_BLK_DEV_IDE_PCMCIA) [N/y/?] CMD640 chipset bugfix/support (CONFIG_BLK_DEV_CMD640) [N/y/?] RZ1000 chipset bugfix/support (CONFIG_BLK_DEV_RZ1000) [N/y/?] Intel 82371 PIIX (Triton I/II) DMA support (CONFIG_BLK_DEV_TRITON) [Y/n/?] Other IDE chipset support (CONFIG_IDE_CHIPSETS) [N/y/?] * * Additional Block Devices * Loopback device support (CONFIG_BLK_DEV_LOOP) [N/y/m/?] Multiple devices driver support (CONFIG_BLK_DEV_MD) [N/y/?] RAM disk support (CONFIG_BLK_DEV_RAM) [N/y/m/?] XT harddisk support (CONFIG_BLK_DEV_XD) [N/y/m/?] * * Networking options * Network firewalls (CONFIG_FIREWALL) [N/y/?] Network aliasing (CONFIG_NET_ALIAS) [Y/n/?] TCP/IP networking (CONFIG_INET) [Y/n/?] IP: forwarding/gatewaying (CONFIG_IP_FORWARD) [N/y/?] IP: multicasting (CONFIG_IP_MULTICAST) [N/y/?] IP: syn cookies (CONFIG_SYN_COOKIES) [N/y/?] IP: rst cookies (CONFIG_RST_COOKIES) [N/y/?] IP: accounting (CONFIG_IP_ACCT) [N/y/?] IP: optimize as router not host (CONFIG_IP_ROUTER) [N/y/?] IP: tunneling (CONFIG_NET_IPIP) [N/y/m/?] IP: aliasing support (CONFIG_IP_ALIAS) [M/n/y/?] * * (it is safe to leave these untouched) * IP: PC/TCP compatibility mode (CONFIG_INET_PCTCP) [N/y/?] IP: Reverse ARP (CONFIG_INET_RARP) [N/y/m/?] IP: Disable Path MTU Discovery (normally enabled) (CONFIG_NO_PATH_MTU_DISCOVERY) [N/y/?] IP: Drop source routed frames (CONFIG_IP_NOSR) [Y/n/?] IP: Allow large windows (not recommended if <16Mb of memory) (CONFIG_SKB_LARGE) [Y/n/?] * * * The IPX protocol (CONFIG_IPX) [N/y/m/?] Appletalk DDP (CONFIG_ATALK) [N/y/m/?] Amateur Radio AX.25 Level 2 (CONFIG_AX25) [N/y/?] Bridging (EXPERIMENTAL) (CONFIG_BRIDGE) [N/y/?] Kernel/User network link driver (CONFIG_NETLINK) [N/y/?] * * SCSI support * SCSI support (CONFIG_SCSI) [N/y/m/?] * * Network device support * Network device support (CONFIG_NETDEVICES) [Y/n/?] Dummy net driver support (CONFIG_DUMMY) [M/n/y/?] EQL (serial line load balancing) support (CONFIG_EQUALIZER) [N/y/m/?] Frame relay DLCI support (EXPERIMENTAL) (CONFIG_DLCI) [N/y/m/?] PLIP (parallel port) support (CONFIG_PLIP) [N/y/m/?] PPP (point-to-point) support (CONFIG_PPP) [Y/m/n/?] * * CCP compressors for PPP are only built as modules. * SLIP (serial line) support (CONFIG_SLIP) [N/y/m/?] Radio network interfaces (CONFIG_NET_RADIO) [N/y/?] Ethernet (10 or 100Mbit) (CONFIG_NET_ETHERNET) [Y/n/?] 3COM cards (CONFIG_NET_VENDOR_3COM) [N/y/?] AMD LANCE and PCnet (AT1500 and NE2100) support (CONFIG_LANCE) [N/y/?] Western Digital/SMC cards (CONFIG_NET_VENDOR_SMC) [N/y/?] Other ISA cards (CONFIG_NET_ISA) [N/y/?] EISA, VLB, PCI and on board controllers (CONFIG_NET_EISA) [N/y/?] Pocket and portable adaptors (CONFIG_NET_POCKET) [N/y/?] Token Ring driver support (CONFIG_TR) [N/y/?] FDDI driver support (CONFIG_FDDI) [N/y/?] ARCnet support (CONFIG_ARCNET) [N/y/m/?] * * ISDN subsystem * ISDN support (CONFIG_ISDN) [N/y/m/?] * * CD-ROM drivers (not for SCSI or IDE/ATAPI drives) * Support non-SCSI/IDE/ATAPI CDROM drives (CONFIG_CD_NO_IDESCSI) [N/y/?] * * Filesystems * Quota support (CONFIG_QUOTA) [N/y/?] Minix fs support (CONFIG_MINIX_FS) [N/y/m/?] Extended fs support (CONFIG_EXT_FS) [N/y/m/?] Second extended fs support (CONFIG_EXT2_FS) [Y/m/n/?] xiafs filesystem support (CONFIG_XIA_FS) [N/y/m/?] DOS FAT fs support (CONFIG_FAT_FS) [Y/m/n/?] MSDOS fs support (CONFIG_MSDOS_FS) [Y/m/n/?] VFAT (Windows-95) fs support (CONFIG_VFAT_FS) [Y/m/n/?] umsdos: Unix like fs on top of std MSDOS FAT fs (CONFIG_UMSDOS_FS) [N/y/m/?] /proc filesystem support (CONFIG_PROC_FS) [Y/n/?] NFS filesystem support (CONFIG_NFS_FS) [M/n/y/?] SMB filesystem support (to mount WfW shares etc..) (CONFIG_SMB_FS) [N/y/m/?] ISO9660 cdrom filesystem support (CONFIG_ISO9660_FS) [Y/m/n/?] OS/2 HPFS filesystem support (read only) (CONFIG_HPFS_FS) [N/y/m/?] System V and Coherent filesystem support (CONFIG_SYSV_FS) [N/y/m/?] Kernel automounter support (experimental) (CONFIG_AUTOFS_FS) [N/y/m/?] Amiga FFS filesystem support (EXPERIMENTAL) (CONFIG_AFFS_FS) [N/y/m/?] UFS filesystem support (read only) (CONFIG_UFS_FS) [N/y/m/?] * * Character devices * Standard/generic serial support (CONFIG_SERIAL) [Y/m/n/?] Digiboard PC/Xx Support (CONFIG_DIGI) [N/y/?] Cyclades async mux support (CONFIG_CYCLADES) [N/y/m/?] Stallion multiport serial support (CONFIG_STALDRV) [N/y/?] SDL RISCom/8 card support (CONFIG_RISCOM8) [N/y/m/?] Parallel printer support (CONFIG_PRINTER) [N/y/m/?] Specialix IO8+ card support (CONFIG_SPECIALIX) [N/y/m/?] Mouse Support (not serial mice) (CONFIG_MOUSE) [Y/n/?] ATIXL busmouse support (CONFIG_ATIXL_BUSMOUSE) [N/y/m/?] Logitech busmouse support (CONFIG_BUSMOUSE) [N/y/m/?] Microsoft busmouse support (CONFIG_MS_BUSMOUSE) [N/y/m/?] PS/2 mouse (aka "auxiliary device") support (CONFIG_PSMOUSE) [Y/m/n/?] C&T 82C710 mouse port support (as on TI Travelmate) (CONFIG_82C710_MOUSE) [N/y/?] Support for user misc device modules (CONFIG_UMISC) [N/y/?] QIC-02 tape support (CONFIG_QIC02_TAPE) [N/y/?] Ftape (QIC-80/Travan) support (CONFIG_FTAPE) [N/y/m/?] Advanced Power Management BIOS support (CONFIG_APM) [Y/n/?] Ignore USER SUSPEND (CONFIG_APM_IGNORE_USER_SUSPEND) [N/y/?] Enable PM at boot time (CONFIG_APM_DO_ENABLE) [Y/n/?] Make CPU Idle calls when idle (CONFIG_APM_CPU_IDLE) [Y/n/?] Enable console blanking using APM (CONFIG_APM_DISPLAY_BLANK) [Y/n/?] Power off on shutdown (CONFIG_APM_POWER_OFF) [Y/n/?] Watchdog Timer Support (CONFIG_WATCHDOG) [N/y/?] Enhanced Real Time Clock Support (CONFIG_RTC) [N/y/?] * * Sound * Sound card support (CONFIG_SOUND) [Y/m/n/?] make[1]: Entering directory `/usr/src/linux/drivers/sound' gcc -I/usr/src/linux/include -o configure configure.c ********************************************************* * Readme.cards (this directory) contains some card * * specific instructions. * * See http://www.4front-tech.com/ossfree for most up * * to date info. * * * * DON'T USE PROGRAMS FROM SND_UTIL PACKAGE EARLIER THAN * * snd-util-3.5 WITH THIS SOUND DRIVER VERSION. * ********************************************************* make[2]: Entering directory `/usr/src/linux/drivers/sound' Compiling Sound Driver v 3.5.5-beta1 for Linux make[2]: Leaving directory `/usr/src/linux/drivers/sound' Configuring Sound Support Old configuration exists in `/etc/soundconf'. Use it [Y/n/?] n ProAudioSpectrum 16 support [N/y/?] Sound Blaster (SB, SBPro, SB16, clones) support [N/y/?] y Gravis Ultrasound support [N/y/?] MPU-401 support (NOT for SB16) [N/y/?] 6850 UART Midi support [N/y/?] PSS (ECHO-ADI2111) support [N/y/?] Microsoft Sound System support [N/y/?] Ensoniq SoundScape support [N/y/?] MediaTrix AudioTrix Pro support [N/y/?] Support for MAD16 and/or Mozart based cards [N/y/?] Support for Crystal CS4232 based (PnP) cards [N/y/?] Support for Turtle Beach Wave Front (Maui, Tropez) synthesizers [N/y/?] /dev/dsp and /dev/audio support [Y/n/?] MIDI interface support [Y/n/?] FM synthesizer (YM3812/OPL-3) support [Y/n/?] Support for the SG NX Pro mixer [N/y/?] Support for the MV Jazz16 (ProSonic etc.) [N/y/?] Do you have a Logitech SoundMan Games [N/y/?] I/O base for SB Possible values are: Check from manual of the card The default value is 220 Enter the value: I/O base for SB set to 220. Sound Blaster IRQ Possible values are: Check from manual of the card The default value is 7 Enter the value: 5 Sound Blaster IRQ set to 5. Sound Blaster DMA Possible values are: 0, 1 or 3 The default value is 1 Enter the value: Sound Blaster DMA set to 1. Sound Blaster 16 bit DMA (_REQUIRED_for SB16, Jazz16, SMW) Possible values are: 5, 6 or 7 (use 1 for 8 bit cards) The default value is 5 Enter the value: Sound Blaster 16 bit DMA (_REQUIRED_for SB16, Jazz16, SMW) set to 5. MPU401 I/O base of SB16, Jazz16 and ES1688 Possible values are: Check from manual of the card (0 disables this feature) The default value is 0 Enter the value: SB MPU401 IRQ (Jazz16, SM Wave and ES1688) Possible values are: Use -1 with SB16 (-1 disables this feature) The default value is -1 Enter the value: Audio DMA buffer size Possible values are: 4096, 16384, 32768 or 65536 The default value is 65536 Enter the value: Audio DMA buffer size set to 65536. The sound driver is now configured. Save copy of this configuration to `/etc/soundconf' [Y/n/?] make[1]: Leaving directory `/usr/src/linux/drivers/sound' Additional low level drivers (CONFIG_LOWLEVEL_SOUND) [N/y/?] * * Kernel hacking * Kernel profiling support (CONFIG_PROFILE) [N/y/?] The linux kernel is now hopefully configured for your setup. Check the top-level Makefile for additional configuration, and do a 'make dep ; make clean' if you want to be sure all the files are correctly re-made wopr:/usr/src/linux:#